G-tune version 1.2
(C) Copyright James H. Clark,  JHC SoftWare 1998

G-tune’s System Requirements
----------------------------
G-tune is not a resource hungry "bloat-ware" application. It has been designed
to be relatively lean in terms of the hardware required to run it. However, due
to the nature of the numerical calculations required, a fast(ish) processor is
recommended. Moreover, it will only run under a 32-bit Windows operating system
(i.e., Windows95 or NT3.51 or greater).

The basic requirements are thus:

* 486DX4/100Hz or higher. A fast Pentium is recommended. If your G-tune seems slow,
turn off the oscilloscope or spectrum analyser display as this does not affect
the functionality of the tuning algorithm.

* A windows compatible sound card with a capability to record 16-bit mono audio
at a sample rate of 11025Hz.
 
* A video mode of at least 256 colours should be used otherwise the display will
look strange. Any screen resolution may be used.

* 8Mbytes of RAM minimum (this is really the minimum for Windows anyway). The more
RAM the better. Whilst G-tune itself doesn’t need much RAM, all your other
applications will run much better with more memory.

* Windows95/NT(3.51 or greater) is required! It will NOT run on Windows 3.1.